| Lamp Body Material: | Aluminum Alloy |
|---|---|
| IP Rating: | IP66 |
| Irradiated Area: | ≥30m² |
|
Still deciding? Get samples of US$ 129/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Explosion proof lighting or hazardous location lighting is a must in areas that contain fumes, vapors, dust or gases that are susceptible to ignition. Common applications are paint booths, automotive, marine, public works and utilities, mining, grain an sugar mills, offshore rigs, petrochemical plants and many more.
Product Features
Configuration: Using imported LED light source, the average service life is as long as 100,000 hours. The power supply adopts wide voltage processing, which can realize constant current output, has short circuit and over voltage protection functions, and greatly prolongs the service life of lamps and lanterns.
The radiator adopts an integrated streamlined structure, which can better increase the heat conduction. The radiator is arranged in an internal and external circular array to improve the heat dissipation performance.
Anti-glare: toughened glass cover (transparent and frosted two options), anti-impact, anti-glare, so that the light uniform and soft without shadows, transmittance up to 95% - 98%, suitable for all kinds of low-roof, platform, high-roof, high-roof and other places as fixed lighting.
Protection: The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and rust.
Installation mode: Suspension ceiling, bending rod, vertical rod, top ceiling, U-shaped shock-proof bracket (angle adjustable) and other installation modes can be adopted as required.
Inlet port: Series and parallel connection of lamps and lanterns can be realized by adopting double inlet design.
Typical applications of safe light:
|
Branch
|
Explosion Hazard
|
Branch
|
Explosion Hazard
|
|
Chemical Industry
|
Flammable Gases/Liquids/Solids
|
Paint-spraying
|
Overspray in Spray-paint Bays
Solvent Vapor Emissions
|
|
Landfills
Civil Engineering
|
Flammable Landfill Gases
Uncontrolled Gas Emissions
Flammable Gas from poor ventillation sources
|
Agriculture
|
Bio-gas Production Plants
Bio-gas Located on Farms
|
|
Power Generation
|
Lump Coal Dust
|
Metal-work
|
Explosive Metal Dust
Spark-ignitable Metal Dust
|
|
Waste Disposal
|
Waste-water Treatment Gasses
|
Food/Beverage
|
Overspray in Spray-paint Bays
Solvent Vapor Emissions
|
|
Gas Suppliers
|
Natural Gas Leagage
Natural Gas Emissions
|
Pharmaceutical
|
Alcohol Solvents
Materials explosive when mixed
|
|
Woodworking Industry
|
Saw Dust
Fine Wood Chips
|
Refinery
|
Hydorocarbons close to their flash-points
Oil Processing Plants
|
These Class I, II, and III fixtures illuminate Division 1 hazardous locations where flammable gases or vapors, combustible dusts, and/or ignitable fibers or flyings are normally present. Their group ratings designate use in locations with specific types of gas, vapor, or dust. Also called explosion-proof fixtures, they contain explosions that may trigger within the fixture and prevent arcs or sparks within the fixture from igniting gases, vapors, dusts, fibers, or flyings on or near the fixture.brbrFlammable gases and vapors are Class I hazards commonly found in petroleum refineries, fuel dispensaries, sewage treatment plants, and processes using chemicals, paints, coatings, or sealants. Combustible dusts are Class II hazards commonly found in pharmaceutical factories, coal-handling plants, grain elevators, and plants processing flour, feed, or powder. Ignitable fibers and flyings are Class III hazards commonly found in textile mills, lumber mills, and other plants with airborne fibers or sawdust.
|
Rated Voltage |
VOLT |
AC220 |
V |
|
|
Power |
P |
40-80 |
W |
|
|
Protection Level |
IP |
IP66 |
IP |
|
|
Lighting Angle |
θ |
120 |
° |
|
|
LED Qty |
/ |
60 |
80 |
PCS |
|
Base Specifications |
/ |
CREE3030 |
||
|
Anti-corrosion Grade |
/ |
WF2 |
||
|
Explosion Proof Grade |
/ |
Ex d IIC T6 |
||
|
Light Efficiency |
η |
120 |
Lm/W |
|
|
Frequency |
f |
50/60 |
Hz |
|
|
Power Factor |
PF |
>0.95 |
PF |
|
|
Operating Temperature |
TOPR |
-30~50 |
ºC |
|
|
Storage Temperature |
TOPR |
-30~50 |
ºC |
|
|
Light Source |
/ |
led |
PCS |
|
|
Correlate Color Temperature |
Tc |
3000-6500 |
K |
|
|
Color Rendering Index |
CRI |
≥70 |
RA |
|
|
LED'S Operating Life |
LIFE |
100000 |
Hours |
|
|
Start-up Time |
T |
≤0.2 |
S |
|
|
Executive Standard |
/ |
GB3836.1,GB3836.2 |
||
|
Weight |
/ |
3.9 |
KG |
|
|
Size |
/ |
Φ225×189 |
mm |
|
1.Q: How to contact us?
A: You can send messages to us on trade messenger directly, or send us an email.
2.Q: Can I order samples first to test the quality?
A: Yes, Samples are in stock for you.
3. Q: How does your factory do regarding quality control?
A: Quality is the priority. So can always attach great importance to
quality controlling from the very beginning to the very end.
Our factory has gained production license, ROHS, CE, and ISO9001:2015.
Warranty:
All products have been tested before the shipment and it was packaged in good condition. Please tested the products at first before you assemble it, if any problem here, please inform us within 3 days of receipt. We can arrange the replacement for you if the situation is confirmed.
){kind=link}