100W LED Area Light Fixture, Zone1 Zone2 Explosion Proof Light Fixture

• Lamp Body Material: Aluminum Alloy
• IP Rating: IP66
• Irradiated Area: ≥30m²
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: explosion proof light
• Input Voltage: 220v
• Power: 100-150W
• Color Temperature: Warm White
• Emitting Color: White
• LED Chips Brand: CREE
• Certification: CCC, CE, RoHS
• Lighting Angle: 90
• Anti-Corrosion Grade: Wf2
• Light Source: LED
• Start Time: Less Than 0.2
• Transport Package: Carton
• Specification: 356x257mm
• Trademark: Maxtree
• Origin: Jiangsu
• Production Capacity: 1000PCS/Month
• Package Size: 35.60cm * 30.60cm * 27.90cm
• Package Gross Weight: 7.900kg

Product Description

 

Product Description

It's always a challenging task to work in confined spaces, especially petrochemical industries, prone to explosive chemicals and flammable gases, including methane, hydrogen, propane and other such hydrocarbons. From a purely statistical point of view, 1030 laborers died from occupational injuries related to confined spaces from 2011 to 2018, as per the Bureau of Labor Statistics.
Hazardous location lighting fixtures illuminate areas with flammable, combustible, or ignitable materials.Class I and II fixtures also carry group ratings designating use in locations with specific types of gas, vapor, or dust. Round fixtures have a compact footprint and a traditional jelly jar look. Linear fixtures have a long body to spread light over a wide area. Square fixtures deliver high-output light from high ceilings. Signal and warning lights mark restricted areas or alert people to nearby hazards. Emergency and exit lights turn on during power outages to guide evacuations from buildings. 

Product Parameters

 

Item	Description	Unit
Rated Voltage	AC220	V
Power	100-150	W
Protection Level	IP66	IP
Lighting Angle	90	°
LED Qty	150	PCS
Base Specifications	CREE3030
Anti-corrosion Grade	WF2
Explosion Proof Grade	Ex d IIC T6 Gb
Light Efficiency	120	Lm/W
Frequency	50/60	Hz
Power Factor	>0.95	PF
Operating Temperature	-30~+50	ºC
Storage Temperature	-30~+50	ºC
Light Source	led
Correlate Color Temperature	3000-6500	K
Color Rendering Index	≥70	RA
LED'S Operating Life	100000	Hours
Start-up Time	≤0.2	S
Executive Standard	GB3836.1,GB3836.2
Weight	7.9	KG
Size	Φ356×257	MM

 

Detailed Photos

 

Installation Instructions

 

Application scenarios

 Dry Spray Paint Booth

Dry spray paint booths

In each spray booth, the arrangement of the paint mist filter holes will produce a cyclone effect, forcing paint particles to fall on the bottom of the booth, and the airflow will be discharged from the filter, which effectively removes paint mist particles. From this cyclone effect. Depending on the nature of the spray paint product, the filtration rate reaches 96%. Even with the kind of high-performance paint, the surface is rarely blocked. Dry paint mist filter can block every tiny particle.

Features of Dry Paint Booth

Dry spray booths are the development trend of spray painting operations with low output (limited to working environments with small spray volume)
 The dry spray booth first uses paint mist filter cotton and then uses an activated carbon purifier to filter, and some add a paint mist filter cotton before the activated carbon to extend the life of the activated carbon;
 The simple dry spray booth is very simple to use activated carbon filter;
 The paint mist filter cotton can be reused, and the time is determined by the specific working conditions of the manufacturer;
 Under normal operation, there are no more fire hazards than families;
 The investment is less than that of the wet type, and the operating cost is not high.

More Products

 

  For more product details, specifications and certification, please contact us


 

FAQ

Q1:Can I have a sample order for led light?                                                       
Yes,we welcome sample order to test and check quality,Mixed samples are acceptable.

Q2.What about lead time?
Sample needs 3-5 days,mass productions time needs about 25 days for large quantity.

Q3.ODM or OEM is acceptaed?
Yes,we can do ODM&OEM,put your logo on the light or package both are available.

Q4.How do you ship the goods and how long does it take to arrive?
We usually ship by DHL,UPS,FedEx or TNT. It usally takes 3-5 days to arrive. Airline and shipping are also optional.

Q5.How is the after sales service?
We have a professional team which is in charge of after-sales service,also a service hot-line dealing with your complains and feedback.