Aluminum Waterproof Solar Powered Road Stud LED Underground Lights

• Light Source: LED Lamp
• Lamp Body Material: Aluminum
• Light Type: Solar
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LED Cats Eye Lights
• Color Temperature: Warm White
• Power: ≤5W
• Technics: Painted Matte
• Illumination Time: 12h
• Cell Type: Ni-MH Battery
• Charging Time (H): 6
• Usage: Street
• IP Rating: IP68
• Certification: CE, RoHS
• Voltage: 12/24V
• With Light Source: With Light Source
• Transport Package: Maxtree
• Specification: 110*95*25mm
• Trademark: Maxtree
• Origin: Shang Hai
• HS Code: 85122010
• Production Capacity: 500 PCS/Day

Product Description

Product Description

Aluminum shell, high brightness led light
IP68 waterproof protection
Long working time-180hours for flashing,40hours for steady after fully charged
Automatically charge during daytime. Auto turn on at night and off at sunrise

Detailed Photos

 

 

Product Parameters

 

Solar Panel	Storage	Lighting Time	LED Color	LED Qty
2V/100MA Monocrystalline	1.2V/600MAH Hi-temperature Ni-mh Battery	100h after fully charged	Yellow,Blue,Green,White	6PCS Diameter 5mm High Brightness Epistar LED
Turn on Light Intensity	Lifespan	Material	Weight Resistance in static	Carton Size
400-500Lux	3-5years	Anti-UV PC+Aluminum	>20 Tons	34.5*27.5*24CM;60pcs/ctn

  

 

Our Advantages

 

1) Suitable for edge line of road and pavement

2) Can use over 180hrs in the foggy or rainy day after fully charged.

3) Can work more than 3 years normally

4) Energy saving and environmental protection

5) Fix firmly the product by epoxy resin glue or screws

6) It can load-bearing 20 tons

7) Waterproof and unbreakable: Solar panel, electronics and optics are fitted inside

 

  

Installation Instructions

   
    • Check if the solar stud charges and discharges normally
    • Identify the place for installation
    • Clean road surfaces 
    • Clean the bottom of the solar stud and use epoxy glue to stick it to the ground
    • Wait 8 hours for drying before activating solar stud
    • Caution: never installed in the central line
 

 

Application scenarios

 

Place to Install:
1. Dangerous blind corners and sharp-curves, black spots and poorly lit areas.
2. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.).
3. Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, cross and side walks
4. Guidance lines, traffic islands, roundabouts and mountain roads.
5. Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts.
6. Entertainment areas, parking lots, hotel entrances and gas stations etc. 


 

Related Products

           For more product details, specifications and certification, please contact us