Gas-Proof 1*16W/2*16W Fluorescent Light: Offshore Platforms Security

• Lamp Body Material: Aluminum Alloy
• IP Rating: IP66
• Irradiated Area: 15-30m²
• Model NO.: MXBF8195-QB
• Input Voltage: 85-265V
• Power: 9W, 18W, 36W, 54W
• Color Temperature: Cool White
• Emitting Color: White
• Certification: CCC, CE, RoHS, Atex
• Working Time: >50000 Hours
• Power Factor: More Than 0.96
• Protection Level: IP66
• Anti-Corrosion Grade: Wf2
• Correlate Color Temperature: 3000-6500K
• Transport Package: Carton
• Specification: 1280*202*146MM
• Trademark: Maxtree
• Origin: Jiangsu
• Package Size: 5.00cm * 5.00cm * 5.00cm
• Package Gross Weight: 5.000kg

Product Description

Explosion-proof plastic fluorescent lamp are divided into traditional fluorescent lamps and electrodeless fluorescent lamps. Traditional fluorescent lamps are low-pressure mercury lamps, which use low-pressure mercury vapor to radiate ultraviolet rays during the discharge process, so that the fluorescent powder emits visible light. Therefore, it is a low-pressure arc discharge light source. . Explosion-proof discharge lamps that mainly use ultraviolet radiation generated by discharge to excite phosphors to emit light are called explosion-proof fluorescent lamps.

The fluorescent explosion-proof lighting is suitable for use in the ship, oil production platforms, chemical industry and zone 1 or zone 2 areas of the explosive gas environment. The shell is made of good quality steel, and the lampshade is made of good quality transparent PC. The light adopts a fluorescent lamp.  It can be applicable to hang-type installation, and it is convenient to replace the light tube. The light body adopts a seal structure, it has high waterproof performance and anti-corrosion performance. It is an integral type clip with high protection grade.
 

EXCELLENT HEAT CONDUCTIONAND STRONGER HEAT

The whole lamp adopts air diversion and heat dissipation structure design;

The radiator adopts special ADC12 alloy aluminum material for die casting, which is formedby high pressure die casting, with high strength, fast heat conduction and strong heatdissipation;

Adopt silicone grease with thermal conductivity of 3.0, which can conduct heat more quickly

The lamp adopts a curved road sealing structure, which has strong waterproof and dustproof performance;
The built-in ballast is a special explosion-proof ballast made by our company, and its power factor cosφ≥0.95;

 

Key Features

Configuration

It adopts imported LED light source, with an average service life of up to 100,000 hours. The power supply adopts wide voltage processing, which can realize constant current output, and has short-circuit and over-voltage protection functions, which greatly prolongs the service life of the lamps.

Heat dissipation

explosion-proof electrical box and lamp holder double cavity design, large space size to ensure the assembly of various large-scale electrical appliances. Excellent heat dissipation performance, so that the LED chip and power supply temperature rise is reasonably controlled within a reasonable range, greatly ensuring the service life of the lamp .
 

light distribution

light projection is even and soft, especially suitable for all kinds of need to cast light, floodlights as a fixed lighting.

Protection

The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and never rust.

Installation method

Various installation methods such as ceiling, suction wall and U-shaped anti-vibration bracket (angle adjustable) can be used as needed.
 

 

Detailed Photos

 

Product Parameters

The LAMPUSITE LED is built to perform effectively and economically in areas that may be difficult to service, expensive to shut down or any location requiring an increased degree of safety. Compared with conventional lighting, the Maxtree LED consumes up to 85% less energy and typically lasts as long as 50,000 hours or more. 
 

	Short	Long
Rated power	1×8/2×8W	1×16/2×16W
Rated voltage	AC220v
Explosion-proof mark	ExdembIICT5
degree of protection	IP54
Anti-corrosion grade	WF2
Dimensions	800×180×120mm	1380×180×120mm
Weight	3.1kg	4.96kg

Dimensions
 

Installation Instructions

  

 

Serial Number	Name	Remark	Serial Number	Name	Remark
1	Mount		13	Mounting bracket (90°)
2	Explosion-proof and anti-corrosion all-plastic fluorescent lamp		14	Mount
3	Hook up	User-supplied	15	screw	M8
4	The chain		16	Explosion-proof junction box (II C)	AH-20dc
5	Hook up	User-supplied	17	Steel Pipe	G3/4
6	Screw rings		18	Connector
7	Mount		19	tube	G11/4
8	Bent pipe	GI	20	tube	G11/4
9	Explosion-proof flexible connecting pipe or cable	User-supplied	21	U-shaped pipe clamp	User-supplied
10	Fixed pipe clamp	User-supplied	22	Explosion-proof pipe joint	G3/4
11	Pipe clamp		23	Explosion-proof junction box (II C)	AH-B/20C
12	Mounting bracket (30°)		-	-	-

Application scenarios

1. Applicable to zone 1 and 2 of explosive environment;
2. Applicable to IIA, IIB, IIC explosive gas environment;
3. Applicable to zone 20, 21 and 22 of explosive dust environment;
4. Applicable to the environment where the temperature group is TI-T6;
4. It is mainly used in explosive and flammable places such as petrochemical industry. The installation can be hung or hung.


Caution

-Schematic diagram

1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.

-Using The Matters Needing Attention

1. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
3. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
4. The luminaire must be reliably grounded.

-Quality Assurance

The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
Explosion Proof Exit Light EX proof Emergency Light Explosion-Proof High Bay Light

 

FAQ

1.Why is Explosion Proof Lighting necessary in your area?

Plenty of commercial facilities have areas where lighting fixtures can come into contact with hazardous materials. These can be flammable, combustible, or ignitable materials, gases, or vapors. These areas can be at risk of fire or even explosion if the lighting fixtures can't withstand the abnormal conditions.

2.What is hazardous location lighting?

Hazardous location lighting refers to fixtures that you can safely use in an area where it's likely that fire might start. According to the National Electrical Code, hazardous locations are those areas "where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitable fibers or flyings."

3.What is explosion-proof light fixture?

Explosion proof lighting refers to lighting fixtures that are able to contain sparks that could potentially  the flammable and explosive gases in the atmosphere. Therefore, explosion proof lighting does not refer to lighting equipment that are resistant to explosions but rather, the capacity to prevent external explosions from occurring in a hazardous location.

4.What environments require hazardous location lighting?

Presence of Flammable Liquids and Gases
Wherever flammable gases and liquids are present, the location may be identified as a hazardous one because such compounds can cause an explosion or catch fire.
Gas and liquids have to achieve a critical concentration before it becomes dangerous. However, once they do, that's when a potential disaster can occur.

 

Company Profile

As a leading supplier of explosion proof lighting,Lamp suite is dedicated to helping you illuminate numerous settings with powerful and durable lighting systems. We've assisted a variety of businesses with projecting sufficient lighting across the work space or public area, including:

- Commercial scenes
- Government projects
- Mining sites
- Remote accommodation sites
- Warehouses & other industrial environments

Our explosion proof lighting is designed using technologically advanced methods with both economical and ecological results. Lighting is a crucial aspect of successful workflow and, therefore, your business' profit. 

Finding suitable lighting for the work site that won't falter under extreme circumstances is what makes it most reliable in any situation. Lamp suite explosion proof lighting is 100% certified with non-spark, durable, and thick materials, along with all necessary features to maintain a high level of safety at all times.
So, what makes Lamp suite different?
Our expertise in solar and technical lighting solutions allows us to give you the appropriate explosion proof lighting to suit you and your business's needs the best. As a result, you can expect outstanding LED performance, lower costs, increased productivity, and safety adherence to give you and your workers total peace of mind.

Lamp suite has a passionate team aiming to help you create a safe working or public environment where workers, pedestrians, shoppers, or anyone nearby can feel comfortable moving around.