Color Temperature: | Warm White |
---|---|
Emitting Color: | White |
IP Rating: | IP68 |
Still deciding? Get samples of US$ 39/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Every day, accidents take place on pedestrian crossings - many of which are fatal. these incidents are often caused by poor visibility, where car drivers are unable to clearly see the crossing, and subsequently, the people on it. this problem is magnified after dark, when visibility is further reduced. consequently, a team of researchers and designers has developed a strategy to improve road safety.
Our road stud features a durable, low maintenance design with outstanding visibility during the day and at night.
SUPER DURABLE:
1.Using the aluminum material to make frame which has better intensity,mechanical resistance is over 30t.
2.There're only 8.2mm rising from road surface after installation,making the road stud be more resistant to the pressure.
3.Special structural design to protect the accessories which is at the top part.
HIGH BRIGHT:
Comparing with the other normal road stud's LED brightness intensity is about 10000cmd,our product has excellent performance at
the day and night which is around 25000~30000 mcd.
WATERPROOF:
1.Groove design at the top of the road stud,it is easy to disperse the water,prevents water stagnation.
2.Road stud's waterproof level can reach to IP68 which is protected by the devoted epoxy filler.
CUSTOM(OPTIONAL):
1Synchronous flash road stud, which is also called co-frequency road stud.
2Sequential flash road stud.
Item
|
Value
|
Product name
|
Ground pedestrian signal light
|
Housing material
|
die-cast aluminum
|
Transparent material
|
10mm wear-resistant PC
|
Red LED
|
single
|
brightness
|
5200~6300mcd,Quantity: 24 pcs, wavelength 620~625nm
|
Green LED
|
single
|
brightness
|
8000~11000mcd
|
Quantity
|
24 pcs, wavelength 503~506nm
|
Working voltage
|
DC12V
|
Drive mode
|
constant current drive
|
Product size
|
φ135x50mm
|
Waterproof rating
|
IP65
|
Load-bearing and compressive
|
above 30T
|
Working mode
|
synchronized display with pedestrian signal lights
|
Installation Depth: 100 mm
Maintenance Method: Base (fixed in the pavement)
Main body (removable)
Other: 1.Ensure any water is removed prior to commencing maintenance.
2.Use the epoxy supplied for best result.
1. Dangerous blind corners and sharp-curves, black spots and poorly lit areas.
2. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.).
3. Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, cross and side walks
4. Guidance lines, traffic islands, roundabouts and mountain roads.
5. Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts.
6. Entertainment areas, parking lots, hotel entrances and gas stations etc.
Q1. Are you a factory?
A: Yes,We are 20 years experienced manufacturer of series traffic safety products,have wide range production line,included warning light,led beacon,solar road stud,traffic sign and other products that related to traffic safety.
Q2. Can I get some samples about solar road stud?
A: We are fully support for sample or trail orders!
Q3. What's the delivery time?
A: Usually take 10-20 days for an order at ordinary time,please kindly check for correct led time when order.
Q4. Can I mix different models in one order?
A: Of course,any color any model as required.
Q5. How does your factory do regarding quality control?
A: Quality is priority. Our QC Team will control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
Q6. How do you ship the goods?
A: Sea shipment, Air cargo,International Express.
Q7: What's the payment you accept ?
A: T/T, L/C, PayPal.
For more product details, specifications and certification, please contact us