180W 200W 240W 300W 360W 400W IP66 LED Explosion Proof Flood Light for Hazardous

• Lamp Body Material: Aluminum
• IP Rating: IP66
• Base Type: PAR30
• Model NO.: 8260
• Irradiated Area: ≥30m²
• Input Voltage: 220v
• Power: 60-100w
• Color Temperature: Pure White
• Emitting Color: White
• LED Chips Brand: CREE
• Certification: CCC, CE
• Ambient Temperature: -40~50
• IP Grade: Wet Locations, Type 4X, IP66
• Cable Entry: NPT 3/4" or M25X1.5 (Adaptor for M20X1.5, NPT 1",
• Mounting Type: Bracket (Possible Wall, Ceiling, and Block Mountin
• Beam Angle: 120° / 60° / 45° / 30°
• CCT: 3500-6500K Customizable
• Transport Package: Carton
• Specification: 30x19x14cm
• Trademark: Maxtree
• Origin: Shang Hai
• HS Code: 85122010
• Production Capacity: 500 PCS/Day
• Package Size: 42.00cm * 32.00cm * 27.00cm
• Package Gross Weight: 10.000kg

Product Description

OVERVIEW

Product Presentation

ITEM	WATT	LUMEN	VOLTAGE	CCT
MXEL-8260	30W	3600lm	AC220V 50/60Hz	3000K 4000K 5000K 6500K
	40W	4800lm
	60W	7200lm
	80W	9600lm
	100W	12000lm
	120W	14400lm
	150W	18000lm
	200W	24000lm
	240W	28800lm
	280W	33600lm
	300W	36000lm
OTHERS	Support for custom wattage, driver, LED chip, optics, beam angle, CCT, dimming, RGB, RGBW, sensor(motion, voice, light...), shell color etc.
COMMON	MODEL:	8260	INPUT VOLTAGE:	AC 100~277V 50/60Hz
	EFFICIENCY:	120Lm/W	POWER FACTOR:	>0.95
	BEAM ANGLE:	30°,45°,60°,120°	WORK TEMP:	-30ºC ~ 50ºC
	CCT:	3000K-6500K	ATEX LEVEL:	Zone1/Div1
	CRI:	≥70RA	LED CHIPS:	CREE
	MATERIAL:	Aluminum	DRIVER:	Meanwell/Other
	IP GRADE:	IP66	LIFESPAN:	100000 hours
	IK GRADE:	IK10	Anticorrosion Grade:	WF2
	Ambient Temperature:	-40ºC~ +55ºC-40°F ~ +131°F	Mounting Type	Bracket,Wall,Celling,block mounting,with adjustable angle
	LED Qty:	280	Light Source:	LED
	WARRANTY:	5 Years	Start-up Time:	≤0.2S
	Weight:	12.5kg	Size:	425×315×175mm
CERT	ATEX, CE,IP66, IK10
FEATURES	High Lumen, excellent CRI, accurate CCT; High brightness, no flickering; Meanwell driver assure long time life span; Easy to install with structure; Ideal replacement for conventional incandescent lamp; No mercury and other hazardous materials, fully CE compliant;
APPL	Gas station, factory, industry, dust explosion area, equipment depot, petroleum pipeline, chemical plant, oil platform, warehouse,tunnel, explosive workshop etc.

Product Description

The explosion proof led flood light is applied to all kinds of the explosion-proof required ships, dock, store place, oil platform, and stadium for illumination, especially used in the environment with high explosion-proof and wide application scope. The shell is made of high tensile aluminum alloy material. It has the ability of high corrosion-proof and shockproof. The lampshade is made of toughened glass with good mechanical and chemical performance. The reflector adopts a high purity aluminum plate that has a good effect through exact light distribution. The floodlights can be adjusted up and down flexibly with 45 degrees and adopt a good LED lamp with energy-efficient. 

Featuring an adjustable lighting angle, our lighting solution allows you to effortlessly direct the illumination to any desired points. This versatile feature enables you to customize and focus the light precisely where it's needed, providing enhanced flexibility in meeting your specific lighting requirements. Whether you aim to highlight specific areas or create a tailored ambiance, the adjustable angle feature ensures seamless adaptability for a variety of settings and preferences.

Incorporating an expansive and efficient heat dissipation structure, our system ensures stable operation through wide-spread and large-area thermal management. This innovative design not only enhances the overall reliability of the device but also enables it to maintain a consistently stable performance over extended periods. The advanced heat dissipation technology is engineered to efficiently disperse heat across a broad surface area, preventing overheating and contributing to the seamless functionality of the system, even under demanding conditions. This robust thermal management solution is tailored for optimal performance, guaranteeing a reliable and sustained operation for your specific needs

Incorporating a dedicated small lens for each LED chips unit, our design minimizes light waste and optimizes efficiency. This innovative approach ensures precision in light distribution by individually managing each LED's output, reducing unnecessary light dispersion. The integration of separate lenses for every LED chip unit not only enhances lighting accuracy but also maximizes the utilization of emitted light, contributing to overall energy efficiency. This meticulous design addresses concerns about light loss, providing an efficient and targeted illumination solution that aligns with sustainable and resource-conscious practices.

Incorporating an isolated high-intensity flame-proof aluminum housing specifically designed for the LED driver, our system prioritizes safety and durability. This specialized housing provides a robust shield, ensuring the LED driver operates securely even in challenging environments. The isolated design enhances safety measures by containing potential flame hazards within the aluminum enclosure, offering a dependable solution for applications where flame resistance is paramount. This meticulous attention to the protective housing not only safeguards the LED driver but also extends the overall lifespan of the lighting system, making it a reliable choice for demanding conditions.

 

Key Features

Configuration

It adopts imported LED light source, with an average service life of up to 100,000 hours. The power supply adopts wide voltage processing, which can realize constant current output, and has short-circuit and over-voltage protection functions, which greatly prolongs the service life of the lamps.

Heat dissipation

explosion-proof electrical box and lamp holder double cavity design, large space size to ensure the assembly of various large-scale electrical appliances. Excellent heat dissipation performance, so that the LED chip and power supply temperature rise is reasonably controlled within a reasonable range, greatly ensuring the service life of the lamp .
 

 

light distribution

light projection is even and soft, especially suitable for all kinds of need to cast light, floodlights as a fixed lighting.

Protection

The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and never rust.

Installation method

Various installation methods such as ceiling, suction wall and U-shaped anti-vibration bracket (angle adjustable) can be used as needed.
 

 

Detailed Photos

 

TIPS

1. This product is an explosion-proof product and can be used in explosion-proof places.

 

2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.

 

3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.

 

4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.

 

5. The luminaire must be reliably grounded.

 

Product Parameters

 

Rated Voltage	100-277V AC 50/60Hz 200-480V AC 50/60Hz
Wattage(W)	30W	40W	60W	80W	100W	120W	150W	200W
Lumens(LM)	3600	4800	7200	9600	12000	14400	18000	24000
Color Temperature	5000K/4000K/3000K
IP Grade	Wet Locations, Type 4X, IP66
Ambient Temperature	-40ºC~ +55ºC /-40°F ~ +131°F
Cable Entry	NPT 3/4" or M25X1.5 (adaptor for M20x1.5, NPT 1", NPT1 1/2")
Terminals	Terminal blocks ≤ 2.5mm², cable diameter 10-14mm
Mounting Type	Bracket (Possible wall, ceiling, and block mounting with adjustable angle)
Beam Angle	120°  / 60° / 45° / 30°

 

Installation

 

Application

Application areas

Working in potentially explosive areas require explosion proof lighting solutions. We have taken advantage of these multiple technology developments to design a new range of explosion proof LED work lights providing powerful illumination, extreme durability, versatile functionality, and very long lifetime.

The explosion proof work lights are approved and certified according to the latest European ATEX directive.

 
Packaging logistics
 

Name	Description	Quantity	Name	Parameter
Outer box	336*514*240mm Five layers of corrugated paper	1	N.W.	9.6kg
Foam	325*88*65mm	4	G.W.	10.7kg
Line foam	95*95*54mm	2
Packaging method		A box of two

Caution

-Schematic diagram

1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.            
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.            
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.            
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.           
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.

-Using The Matters Needing Attention

1. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
3. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
4. The luminaire must be reliably grounded.

-Quality Assurance

The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
 

More Products

        Explosion Proof Exit Light                                         EX proof Emergency Light                                  Explosion-Proof High Bay Light

 

FAQ

1. How do you ensure your products quality and service?

All our production process strictly adhere to ISO9001 procedure, and we also offer clients 3-5 years warranty from the date which B/L issued. If the products doesn't work properly as promised, and the problem is caused by the quality issue, we will provide exchange service for the same item.

2. If we don't find what we need in your website, what shall we do? Can you make the products according to custom requirement?

  Yes, we can provide bespoke service to custom exact specification. You can send us the detailed specification of the products you are in need and our engineer team will check whether it is workable for us. Or you can send us the samples and our engineer team can understand it better.

3. Can I just buy 1 or 2 pcs of sample for testing before place the bulk orders?

  Yes, samples orders are always welcome, we are confident on our lights quality and we believe that you will place bulk order to us once you test our samples.

4. What is your delivery time?

  If the ordered item is in stock, then we can ship the goods to Shanghai port within 5 days after your deposit.  If the ordered item is no stock, the delivery time is based on the order quantity, generally speaking, the delivery time will be within 20 days to deliver to Shanghai port