Product Description
Explosion proof floodlight are ideal for extremely hazardous locations. In fact, these floodlights have been rigorously tested and approved for use where explosive gases, dust, and other flammable materials can create a potentially dangerous environment.
These explosion proof floodlight have been rigorously tested and approved for use where explosive gases, dust, and other flammable materials can create a potentially dangerous environment.
EXCELLENT HEAT CONDUCTIONAND STRONGER HEAT
The whole lamp adopts air diversion and heat dissipation structure design;
The radiator adopts special ADC12 alloy aluminum material for die casting, which is formedby high pressure die casting, with high strength, fast heat conduction and strong heatdissipation;
Adopt silicone grease with thermal conductivity of 3.0, which can conduct heat more quickly
BRAND-DRIVEN AND MORE STABLE
Adopt first-line well-known brand power supply (optional Meanwell, Moso, DONE, InventronicsDriver, etc.), with guaranteed quality and three guarantees;
The powersupply adopts the latest wide voltage technology, which has the characteristicsof constant current output, lighting protection, surge protection, shortcircuit and overvoltage protection, etc. The powerfactor is as high as 0.99, and the quality is more stable;
GOOD "CORE" AND HIGH LIGHT EFFICIENCY
The first-line brand CREE LED light-emitting chip is adopted, which has high brightness and high light efficiency, and the chip light efficiency is > 130 lm/W;
The performance is stable and the average service life of the chip is as long as 100,000 hours;
Smt array patch technology is adopted, which has high heat conduction efficiency and low light attenuation;
Key Features
Configuration
It adopts imported LED light source, with an average service life of up to 100,000 hours. The power supply adopts wide voltage processing, which can realize constant current output, and has short-circuit and over-voltage protection functions, which greatly prolongs the service life of the lamps.
Heat dissipation
explosion-proof electrical box and lamp holder double cavity design, large space size to ensure the assembly of various large-scale electrical appliances. Excellent heat dissipation performance, so that the LED chip and power supply temperature rise is reasonably controlled within a reasonable range, greatly ensuring the service life of the lamp .
light distribution
light projection is even and soft, especially suitable for all kinds of need to cast light, floodlights as a fixed lighting.
Protection
The protection level of the lamp body is IP66, and the anti-corrosion level can reach WF2. The surface of the lamp body will never corrode and never rust.
Installation method
Various installation methods such as ceiling, suction wall and U-shaped anti-vibration bracket (angle adjustable) can be used as needed.
Detailed Photos
TIPS
1. This product is an explosion-proof product and can be used in explosion-proof places.
2. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
3. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
4. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
5. The luminaire must be reliably grounded.
Product Parameters
| ITEM |
Symbol |
Description |
UNIT |
| Rated Voltage |
VOLT |
AC220 |
V |
| Power |
P |
70-100 |
W |
| Protection Level |
IP |
IP66 |
IP |
| Lighting Angle |
θ |
90 |
° |
| LED Qty |
/ |
95 |
PCS |
| Base specifications |
/ |
CREE3030 |
|
| Anticorrosion grade |
/ |
WF2 |
|
| Explosion proof grade |
/ |
Ex de mb IIC T6 |
|
| Light efficiency |
η |
120 |
Lm/W |
| Frequency |
f |
50/60 |
Hz |
| Power Factor |
PF |
>0.95 |
PF |
| Operating Temperature |
TOPR |
-20~40 |
ºC |
| Storage Temperature |
TOPR |
-20~40 |
ºC |
| Light Source |
/ |
led |
PCS |
| Correlate Color Temperature |
CCT |
3000-6500 |
K |
| Color Rendering Index |
CRI |
≥70 |
RA |
| LED'S Operating Life |
LIFE |
100000 |
Hours |
| Start-up time |
T |
≤0.2 |
S |
| Executive standard |
/ |
GB3836.1,GB3836.2 |
|
| Weight |
/ |
3.8 |
KG |
| Size |
/ |
300×186×137 |
mm |
Test Report
Installation
Application
Application areas
gym
Airport
port
Logistics warehouse, workshop
PARKING LOT
Working in potentially explosive areas require explosion proof lighting solutions. We have taken advantage of these multiple technology developments to design a new range of explosion proof LED work lights providing powerful illumination, extreme durability, versatile functionality, and very long lifetime.
The explosion proof work lights are approved and certified according to the latest European ATEX directive.
The shell is made of aluminum alloy die-casting, and the surface is sprayed with high-voltage electrostatic plastic after shot blasting; the structure is light and handy, and the appearance is beautiful and generous; the wall-mounted explosion-proof sound and light alarm
Explosion-proof sound and light alarm is a kind of sound and light alarm equipment installed on the scene, which is used to remind the on-site personnel to pay attention when a fire occurs.
Explosion-proof sound and light alarm used in conjunction with various fire alarm controllers or other controllers. When emergency situations such as accidents or fires occur on the production site and sound and light alarms are required, the control signal sent by the fire alarm controller activates the sound and light alarm circuit, and sends out sound and light alarm signals to complete the alarm purpose. It can also be used in conjunction with the manual alarm button to achieve simple sound and light alarm purposes.
Packaging logistics
| Name |
Description |
Quantity |
Name |
Parameter |
| Outer box |
336*514*240mm
Five layers of corrugated paper |
1 |
N.W. |
9.6kg |
|
|
| Foam |
325*88*65mm |
4 |
G.W. |
10.7kg |
| Line foam |
95*95*54mm |
2 |
|
|
| Packaging method |
A box of two |
Caution
-Schematic diagram
1.Before installation, it is necessary to check whether the actual operating conditions are in conformity with the parameters listed on the lamp nameplate.
2.Before installation, please test the lighting according to the parameters of the lamp nameplate to ensure that there is no quality problem before installation.
3.Before installation, it is necessary to determine the installation location and mode of the lamps according to the installation mode provided by the product, in combination with the on-site use environment and lighting requirements, so as to ensure that the installation is firm and reliable.
4.Connect the prepared cables with the input cables of lamps and lanterns according to the corresponding fire (brown), zero (blue) and ground (yellow-green) wires, so as to ensure that the connection is firm, and make good insulation and waterproof measures at the connection.
5.The input end of the cable can be connected to the power supply of the corresponding voltage to illuminate.
-Using The Matters Needing Attention
1. When transporting, the lamp should be installed in the carton equipped with foam shock absorption.
2. When using, the surface of the lamp has a certain temperature rise, which is a normal phenomenon.
3. The power supply voltage can work normally in the rated voltage. If the power supply voltage is too high, the lamp will be damaged; if the voltage is too low, the lamp will not start normally.
4. The luminaire must be reliably grounded.
-Quality Assurance
The company has passed ISO9001:2008 international quality system audit certification, this product strictly implements ISO9001 international quality management system standard production, to ensure that the product quality fully meets national standards and design requirements.
More Products
Explosion Proof Exit Light EX proof Emergency Light Explosion-Proof High Bay Light
FAQ
1. How do you ensure your products quality and service?
All our production process strictly adhere to ISO9001 procedure, and we also offer clients 3-5 years warranty from the date which B/L issued. If the products doesn't work properly as promised, and the problem is caused by the quality issue, we will provide exchange service for the same item.
2. If we don't find what we need in your website, what shall we do? Can you make the products according to custom requirement?
Yes, we can provide bespoke service to custom exact specification. You can send us the detailed specification of the products you are in need and our engineer team will check whether it is workable for us. Or you can send us the samples and our engineer team can understand it better.
3. Can I just buy 1 or 2 pcs of sample for testing before place the bulk orders?
Yes, samples orders are always welcome, we are confident on our lights quality and we believe that you will place bulk order to us once you test our samples.
4. What is your delivery time?
If the ordered item is in stock, then we can ship the goods to Shanghai port within 5 days after your deposit. If the ordered item is no stock, the delivery time is based on the order quantity, generally speaking, the delivery time will be within 20 days to deliver to Shanghai port
Company Profile
Do you need a place to purchase safety products for various needs? Are you simply looking for quality and durable products from a trusted manufacturer? If yes, you are in the ideal store. Whatever needs you to have as regards to safety; you are assured of getting the right product at an affordable price.
Who We Are
We are a brand that stands for consistent quality and safety. We specialized in the production of a wide range of warehouse Safety product. We want to be your partner and a one-stop solution for all safety-related products. Our products are uniquely produced to ensure the safety of pedestrians who are working around forklifts. We have been in business of providing exceptional service for over five years consistently providing the best material handling solutions to our esteemed customers. You can simply call us your partner!
Our Promise
We promise to improve on its range of products and make sourcing warehouse safety equipment simpler for its customers. We promise to provide the best customer service and offer you various safe to use products that will best suit your needs. We promise to provide consistent quality and service while showing you respect and holding your businesses in high regard. Believe us when we say we will always work with your best interests in mind.
What we offer
We group of companies produces and manufactures products such as blue spotlight, blue arrow light, red zone light and crane warning light.Our safety products can be found in airports, warehouses, and any other facility needed to improve safety.
What Makes Us Special
We have a plethora of products to ensure you are provided with something special. You know you are getting the best from us whenever you choose to purchase any of our products. We offer you the best products at a relatively low price. We stand by all our products and customers 100% as we offer great value for your money. Our customer service is responsible and responsive always available to walk you through the process of choosing and purchasing any of our products as we want you to always come back for more of our unique products.
CONTACT US
With us, we look forward to satisfying our customers and give them an exceptional safety solution. We have excellent customer service representatives who work round the clock to treat you like the special person you are. Typically we respond to calls and emails promptly, and we are accessible 24/7. Don't hesitate to reach us if you have any question or queries. You can also reach us to drop your comments on how we can better serve you.
We can provide everything you need to outfit your new or existing fleet with just one call - 18015050416 or one mail . Our office address is located at A2Shimao Plaza, Xinbei District Changzhou 213000, Jiangsu (China).
Once again you are welcome to the leading safety store.
){kind=link}
){kind=link}