Light Source: | LED Lamp |
---|---|
Lamp Body Material: | Aluminum |
Light Type: | Solar |
Samples: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Features of Solar Road Stud/Solar LED Aluminum Road Stud
1) Suitable for edge line of road and pavement
2) Can use over 180hrs in the foggy or rainy day after fully charged.
3) Can work more than 3 years normally
4) Energy saving and environmental protection
5) Fix firmly the product by epoxy resin glue or screws
6) It can load-bearing 20 tons
7) Waterproof and unbreakable: Solar panel, electronics and optics are fitted inside
Body material
|
Die-cust Aluminum
|
Power supply
|
High Efficient Solar Panel
|
Battery
|
Lithum battery3.2V/500MAH
|
Lifespan
|
5years for Lithum battery;
|
Waterproof
|
IP68
|
Visual distance
|
>900m
|
Load capacity
|
>40T(can be installed in the middle of road)
|
Product size
|
Dia 135*50mm
|
LED Color
|
White/ Red/ Green/ Blue/ Yellow
|
Weight
|
0.8kg
|
LED diodes
|
6pcs
|
working hours
|
more than 168h
|
Before installation:
Placing security isolation facilities for installation work is most important and must not be ignored.
1.Locate the installing position and ensure it is flat. For curving, cracked or uneven pavement, straighten it prior to installation.
2.Clean the installation location with a brush, meanwhile ensure the location is dry.
3.Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction.Glue the road stud thoroughly with proper amount of epoxy glue.
4.Inspect the installed studs within 2 hours after installation, ensuring that all the studs are fixed in correct direction or not crooked.
5.Remove the isolation facilities in 4 hours after the stud's installing glue is thoroughly cured.
Place to Install:
1. Dangerous blind corners and sharp-curves, black spots and poorly lit areas.
2. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.).
3. Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, cross and side walks
4. Guidance lines, traffic islands, roundabouts and mountain roads.
5. Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts.
6. Entertainment areas, parking lots, hotel entrances and gas stations etc.
For more product details, specifications and certification, please contact us
Suppliers with verified business licenses